Testing Laboratory for Ropes and Personal Protective Equipment

The Testing Laboratory for Ropes and Personal Protective Equipment is part of the Testing Laboratory No. 1025 accredited by CIA (Czech Accreditation Institute).

 

NON-DESTRUCTIVE TESTS OF STEEL ROPES

The non-destructive testing of steel ropes with use of a crack detector eliminates the influence of an operator on the result of the test and enables to archive the indicated, tested values automatically. All data are memorized immediately in a notebook in industrial version and at the repeated control they enable to compare the state of the rope at the last control with the present state and to decide about the next operation of the rope or about its removal.

Crack detection of the steel ropes by means of magnetic method with the frequency from 0,25 up to 5 samples per 1 mm (according to the type of the sensor or defect type) with the direct automatic record into the PC of the industrial notebook with data protection against a unwished manipulation with them.

DESTRUCTIVE TESTS OF STEEL ROPES

  • tensile strength tests of steel ropes with loops and pressed sleeves
  • tensile strength tests of steel ropes with sealed rope sockets
  • tensile strength tests of textile ropes with loops
  • tensile strength tests of textile ropes without rope sockets
  • tensile strength tests of binding and lifting tapes
  • tests of steel rope abbreviations
  • tensile strength tests of chains
  • tensile strength tests of pendent elements
  • tensile strength tests of machine parts

 

TESTS OF PERSONAL PROTECTIVE EQUIPMENT

Static and dynamic tests of means for cave explorers, mountain-climbing, including wall climbing, jumping, alpinism and ski-alpinism, revisions of PPE against fall from a height.

 

Sport harnesses

  

Work harnesses

  • guided type fall arresters including a rigid anchor line ČSN EN 353-1
  • guided type fall arresters including a flexible anchor line ČSN EN 353-2
  • lanyards ČSN EN 354
  • energy absorbers ČSN EN 355
  • work positioning lanyards ČSN EN 358
  • retractable type fall arresters ČSN EN 360
  • full body harnesses ČSN EN 361
  • connectors ČSN EN 362
  • accessory cords ČSN EN 564
  • tape ČSN EN 565
  • slings ČSN EN 566
  • rope clamps ČSN EN 567
  • pitons ČSN EN 569
  • anchor devices ČSN EN 795
  • sit harnesses ČSN EN 813
  • energy absorbing systems ČSN EN 958
  • rock anchors ČSN EN 959
  • rescue lifting devices ČSN EN 1496
  • rescue harnesses ČSN EN 1497
  • rescue loops ČSN EN 1498
  • connectors ČSN EN 12275
  • harnesses ČSN EN 12277
  • dynamic mountaineering ropes ČSN EN 892
  • static ropes ČSN EN 1891
  • twisted or braided safety ropes
  • descenders devices ČSN EN 341
  • chocks ČSN EN 12270
  • frictional anchors ČSN EN 12276
  • pulleys ČSN EN 12278


CONTACT

  Name, E-mail Phone (+420) Fax (+420)
  Bc. Aleš Rajský 596 252 318  
TL Manager Ing. Robert Pilař 596 252 235  
Secretary Office Zuzana Gregorová 596 252 243 596 252 149